Analisis Efektivitas Troli Mesin Setter pada Produksi Penetasan Telur Menggunakan Metode OEE dan ORE di PT Suja
Authors
-
Muhammad Taufiq Akh Gandhi Suprayitno
Institut Teknologi dan Sains Nahdlatul Ulama Pasuruan, Indonesia
-
Enik Sulistyowati
DOI:
https://doi.org/10.55757/ekliptika.v4i1.263Keywords:
efektifitas, oee, ore, troli mesin setterAbstract
Penelitian ini menganalisis efektivitas troli mesin setter pada proses penetasan telur di PT
SUJA menggunakan Overall Equipment Effectiveness (OEE) dan Overall Resource
Effectiveness (ORE). Data periode 22 Agustus–22 September 2022 diperoleh melalui
observasi, wawancara, dan dokumentasi. Jumlah telur masuk mencapai 2.241.446 butir,
dengan 2.069.405 butir telur fertile dan 172.041 butir dalam kategori defect. Waktu tersedia
yang dilaporkan adalah 46.080 menit dan downtime 9.955 menit. Naskah sumber
melaporkan OEE 78,92% dan ORE 76,17%. Pemeriksaan perkalian faktor yang tercantum
menghasilkan OEE 72,36% dan ORE 70,00%; kedua hasil pemeriksaan tersebut dibedakan
dari nilai yang dilaporkan. Rasio telur fertile terhadap telur masuk sebesar 92,32% juga
berbeda dari quality rate 92,29% yang tercantum. Nilai efektivitas berada di bawah acuan
85% yang digunakan naskah. Penguatan pencatatan waktu, verifikasi waktu siklus ideal,
pemeriksaan penggerak dan rak troli, serta pengendalian penanganan telur diperlukan
sebelum menetapkan indikator tervalidasi dan menilai keberhasilan perbaikan.
References
[1] S. Sundari dan H. Wahyono, “Pengukuran Produktivitas Mesin Tetas Telur dengan Metode
Overall Equipment Effectiveness (OEE) di PT. Malindo Feedmill Tbk.,” Industrika: Jurnal
Ilmiah Teknik Industri, vol. 4, no. 1, 2021, doi: 10.37090/indstrk.v4i1.193.
[2] S. Nakajima, Introduction to TPM: Total Productive Maintenance. Productivity Press,
1988.
[3] P. Muchiri dan L. Pintelon, “Performance measurement using overall equipment
effectiveness (OEE): literature review and practical application discussion,” International
Journal of Production Research, vol. 46, no. 13, hlm. 3517–3535, 2008, doi:
10.1080/00207540601142645.
[4] J. A. Garza-Reyes, “From measuring overall equipment effectiveness (OEE) to overall
resource effectiveness (ORE),” Journal of Quality in Maintenance Engineering, vol. 21, no.
4, hlm. 506–527, 2015, doi: 10.1108/JQME-03-2014-0014.
[5] L. E. Puspita dan E. P. Widjajati, “Pengukuran Efektivitas Mesin Latexing Pada Produksi
Karpet Permadani dengan Menggunakan Metode Overall Equipment Effectiveness (OEE)
dan Overall Resource Effectiveness (ORE) di PT. XYZ,” Juminten, vol. 2, no. 4, hlm. 1–12,
2021, doi: 10.33005/juminten.v2i4.295.
[6] M. M. Zulfatri, J. Alhilman, dan F. T. D. Atmaji, “Pengukuran Efektivitas Mesin dengan
Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Overall Resource
Effectiveness (ORE) pada Mesin PL1250 di PT XZY,” JISI: Jurnal Integrasi Sistem Industri,
vol. 7, no. 2, hlm. 123–131, 2020, doi: 10.24853/jisi.7.2.123-131.
[7] S. Sunarya, Z. F. Hunusalela, dan Hermanto, “Pengukuran Efektivitas Mesin Menggunakan
Metode Overall Equipment Effectiveness, Overall Resource Effectiveness dan Gupta pada
Mesin Injection Molding PT. Neohyolim Platech,” Jurnal KaLIBRASI, vol. 5, no. 2, hlm. 160–170, 2022, doi: 10.37721/kalibrasi.v5i2.1036.
[8] Suseno dan T. D. Putra, “Pengukuran Efektivitas Penggunaan Mesin Reparasi Tabung Gas
pada Line 2 Menggunakan Metode OEE dan ORE pada PT Petrogas Prima Service,” Jurnal
Cakrawala Ilmiah, vol. 1, no. 10, hlm. 2443–2452, 2022.
[9] Lukmandono, E. Sulistyowati, dan N. L. P. Hariastuti, “Pendekatan Overall Equipment
Effectiveness dan Response Surface Methodology dengan Pertimbangan Root Cause
Failure Analysis untuk Meminimalkan Six Big Losses,” Katalog Buku Karya Dosen ITATS,
hlm. 70–112, 2020. Tersedia: https://ejurnal.itats.ac.id/buku/article/view/1439/0.
[10] M. Taufiq, “Analisis Efektivitas Trolly Mesin Setter pada Produksi Penetasan Telur
dengan Menggunakan Metode OEE dan ORE di PT. SUJA,” skripsi, 2023.
49
Taufiq dan Sulistyowati
Ekliptika : Jurnal Inovasi Teknologi Berkelanjutan
│
Efektivitas Troli Mesin Setter
[11] Ö. Ljungberg, “Measurement of overall equipment effectiveness as a basis for TPM
activities,” International Journal of Operations & Production Management, vol. 18, no. 5,
hlm. 495–507, 1998, doi: 10.1108/01443579810206334.
[12] R. C. Hansen, Overall Equipment Effectiveness: A Powerful Production/Maintenance Tool
for Increased Profits. Industrial Press, 2011.
[13] P. Jonsson dan M. Lesshammar, “Evaluation and improvement of manufacturing
performance measurement systems—the role of OEE,” International Journal of
Operations & Production Management, vol. 19, no. 1, hlm. 55–78, 1999, doi:
10.1108/01443579910244223.
[14] B. Dal, P. Tugwell, dan R. Greatbanks, “Overall equipment effectiveness as a measure of
operational improvement—A practical analysis,” International Journal of Operations &
Production Management, vol. 20, no. 12, hlm. 1488–1502, 2000, doi:
10.1108/01443570010357884.
[15] I. P. S. Ahuja dan J. S. Khamba, “Total productive maintenance: literature review and
directions,” International Journal of Quality & Reliability Management, vol. 25, no. 7, hlm.
709–756, 2008, doi: 10.1108/02656710810890890.
[16] M. A. Pradaka dan J. Aidil SZS, “Analisis Total Productive Maintenance Menggunakan
Metode OEE dan FMEA pada Pabrik Phosporic Acid PT Petrokimia Gresik,” Jurnal Teknik
Industri, vol. 11, no. 3, hlm. 280–289, 2021, doi: 10.25105/jti.v11i3.13087.
[17] P. De Groote, “Maintenance performance analysis: a practical approach,” Journal of
Quality in Maintenance Engineering, vol. 1, no. 2, hlm. 4–24, 1995, doi:
10.1108/13552519510089556.
[18] C. J. Bamber, P. Castka, J. M. Sharp, dan Y. Motara, “Cross-functional team working for
overall equipment effectiveness (OEE),” Journal of Quality in Maintenance Engineering,
vol. 9, no. 3, hlm. 223–238, 2003, doi: 10.1108/13552510310493684.
[19] P. Guariente, I. Antoniolli, L. P. Ferreira, T. Pereira, dan F. J. G. Silva, “Implementing
autonomous maintenance in an automotive components manufacturer,” Procedia
Manufacturing, vol. 13, hlm. 1128–1134, 2017, doi: 10.1016/j.promfg.2017.09.174.
[20] R. Singh, D. B. Shah, A. M. Gohil, dan M. H. Shah, “Overall equipment effectiveness (OEE)
calculation—Automation through hardware & software development,” Procedia
Engineering, vol. 51, hlm. 579–584, 2013, doi: 10.1016/j.proeng.2013.01.082.
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Ekliptika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
